While Prototype Railroad Modeling, Volume Five won't be ready for a couple of months, I thought I'd post a teaser of one of the projects. The Missouri Pacific had a group of 100 flat cars, nos. 8000-8099, that were similar to most of the road's other cars in the 41-42 foot range, not unlike many other roads' flat cars. However, this group of cars was 45 feet in length. This is an appealing length as it falls between the far more common 40-42 and 50-53 foot lengths. After obtaining drawings from the Museum of Transportation, it became apparent that these cars could be kitbashed from two Red Caboose flat cars, confirming my suspicions.
The kitbashes also include much re-detailing, such as replacement of the stake pockets with modified Tichy stake pockets, which are close, but not an exact match, and new scratchbuilt crossbearers. The article in PRM5 will have many photos and accompanying text to help you model these "mid-length" flat cars.
Thursday, October 4, 2018
Wednesday, October 3, 2018
Wordy Wednesday
| CP 241170, San Diego, California, October 9, 1954, Col. Chet McCoid photo, Bob's Photo |
HO scale modelers are fortunate to have fine resin versions of these cars, originally marketed under the Yankee Clipper name and subsequently absorbed into the Funaro & Camerlengo line. The model shown here is one I built about a decade ago (or more, give or take) and featured in the "Essential Freight Cars" series in Railroad Model Craftsman.
P.S. read this article about the fates, both good and bad, of several stations.
Sunday, September 30, 2018
Handling Kadee HGC Trucks
Many of us have welcomed Kadee's High Gravity Compound (HGC) trucks with open arms. They are beautifully rendered representations of useful prototypes, eliminate the toy-like, see-through truck springs, and have a weight near their metal cousins due to the HGC material.
One thing about them that can be maddening is handling them when they are not screwed into a car. They can be like slippery eels as there is nothing holding them together. When purchased as separate trucks, they come with small clips that sit on the screw threads. However, these clips can easily become detached when handling. I am working on painting a pair of sideframes from a PS-1 and came up with a simple solution to keep them together until I get them screwed into the car body. I drilled a hole with a no. 50 drill bit through a piece of 0.030" x 0.188" styrene (although any suitable piece of styrene or even rod will work). I then screwed the truck screw into the piece of styrene. This holds the truck together and allows for handling while I paint and weather the sideframes. Problem solved.
Thursday, September 27, 2018
Scratch Brushes
![]() |
| Scratch brushes: brass, at top, with "bristles" extended and fiberglass, at bottom, with "bristles" retracted |
They are designed to remove buildup of oxidation (and crud) from jewelry. Their proper name is a scratch brush. I ended up ordering one each of the fiberglass and brass variants from Amazon (I am actually an Amazon Prime member to get their data storage, but loathe giving money to
In addition to fiberglass and brass, steel "bristles" are another option. Replacement bristles can be ordered as needed. These tools are about the size and shape of pens. By turning the top of the handle, one can extend or retract the bristles. The shorter the bristles, the more roughly they "score" the surface. After about two strokes across a styrene flat car deck, I realized these are amazing tools for weathering. I cannot recommend them highly enough. I will provide a separate post that highlights some of their capabilities. Until then, buy some of your own and use them liberally.
Wednesday, September 26, 2018
Wordy Wednesday - Pere Marquette 83332
![]() |
| San Diego, California, November 22, 1954, Col. Chet McCoid photo, Bob's Photo Collection |
About the photo... this is the first of what will be many images from Col. Chet McCoid during his wanderings in San Diego. Many of his photos from there were recorded when the light was low and the subjects rendered relatively low contrast and saturated, perfect for highlighting subtleties such as surface details and weathering. Pere Marquette 83332 was built in 1930 by Standard Steel Car Company as part of a group of 1,500 cars, nos. 82000-83499. The cars followed the "Modified" ARA design (based upon 1923 ARA and closely related X29 designs), but with the crossbearers located under the door posts in what would become the "standard" location. This design was ordered by other Van Sweringen roads C&O and Erie, as well. The PM versions used the Hutchins Dry Lading roof, a departure from the cars on their cousins' lines.
Yankee Clipper offered HO scale resin kits of these cars many years ago. They are currently unavailable in the Funaro & Camerlengo line. I am fortunate to have one in my unbuilt kit inventory that will become one of my two "signature" PM cars when I build it. The other is one of the single sheathed automobile cars.
For more about these Pere Marquette prototype box cars, see "Pere Marquette 1930 Steel Box Car" by Jeffrey Koeller in Mainline Modeler, May 2001.
Monday, September 24, 2018
2018 Mid-Atlantic RPM
![]() |
| The largest and most impressive model was the MV Danica Marie as created by host, Bernie Kempinski |
![]() |
| I believe this scratchbuilt structure was the work of Stanley McAdoo... |
![]() |
| ... as was this Norfolk Southern SD70M |
![]() |
| Bernie Kempinski showed off his fine etchings on the sides of these large auto loaders |
![]() |
| Ralph DeBlasi brought several flat cars with interesting loads |
![]() |
| Jerry Dembeck built one of the interesting PFE R-70-2s from a Sunshine kit |
![]() |
| Fritz Dahlin created interesting aluminum bales from the real stuff... |
![]() |
| ... as well as resin interiors for his car models. |
![]() |
| Brad Trenkamp displayed this incredible in-progress model of the American Can Company |
![]() |
| Tom Devenny had a large number of freight cars on display, including this realistically weathered Branchline kit of a DT&I box car |
![]() |
| He also detailed a Con-Cor model of an ACL ventilator, proving that toy trains can be modified into prototypical miniatures, too |
![]() |
| Ted Dilorio conducted a hand-on weathering clinic and had models to illustrate his techniques |
![]() |
| Todd Hermann displayed beautiful models of the CQ Tower and Maintainers' buildings at milepost 97 on the Lehigh Valley in West Catasauqua, PA, circa 1956 |
![]() |
| As always, Bill Hanley shared his highly details B&O models |
![]() |
| Adam Henry flew the banner for N Scale with this Ma & Pa CF7 conversion... |
![]() |
| ... as well as this scratchbuilt model of the lime loadout at the Vulcan Quarry in Hanover, PA |
![]() |
| Butch Eyler held court promoting the virtues of Gouache as a medium for weathering (I agree) |
![]() |
| At an adjacent table, Ted Dilorio and Ralph Heiss also offered hands-on weathering |
![]() |
| Tom Potthast showed some S scale models, including this bridge from castings by Tom Meisner and custom decals for Landsdowne Avenue in St. Louis |
![]() |
| Tom also brought this S Helper SW-9 decorated for Frisco |
![]() |
| Adam Chilcote displayed this Penn Central with a structural load... |
![]() |
| ... as well as this NYC AAR 70-ton flat with highly realistically weathered deck. |
Sunday, September 23, 2018
Revised and Updated "Oddball 40' PS-1 Box Cars" as presented at MARPM
The revised and updated "Oddball 40' PS-1 Box Cars" presentation from the 2018 Mid-Atlantic RPM has been uploaded to the Speedwitch files page. The only change of significance is the work done on the NP 40' combination door car. I am targeting completion for display of the pattern and build work for all but one of the project cars for Prototype Rails (Cocoa Beach).
The "project" cars include:
The "project" cars include:
- CNW automobile car
- SAL AF-4 automobile car
- CNW riveted box car
- at least one 12-panel box car
- NP combination door car (the side illustrated above)
- Southern 9' door opening box car
Subscribe to:
Posts (Atom)




























