Where we are at...

 

I am typing this from an almost horizontal position. I was supposed to be arriving at Naperville today, but my balky back made other plans. So, I type this from home. It's been a couple months or so since I started things back up in earnest, including casting. As the "RPM season" sets in, I thought it a good time to share a little bit about what's coming over the next few months.

Some old Speedwitch stuff turned up: DT&I gondola, MEC ARA box car parts, NYC stock car roof and 50' combination rectangular and diagonal panel roof (some prototype details here.)

Parts sets have proven to be a good way to dip my toes in the casting pool. I mostly learned a few things about what shape of mold works best for me and how I like a few varieties of silicone. I am adding a couple wrinkles to the existing offerings. First, for the ATSF Bx-34 parts I have added the 1959-1970s scheme, illustrated in the photo at the top of the page. In addition, I have added Shadow Keystone decals covering 1950s+ schemes for the PRR X32A parts. 

This and the following three photos are of the R-40-25 parts

On the parts front, there are also a couple other offerings nearing release. The first is the PFE R-40-25. This set is intended for an undecorated Intermountain R-40-23 kit or any Amarillo/Intermountain PFE R-40-25 that is NOT the delivery scheme as the UP medallions on those cars are incorrect (I will share info on that when these parts are released.) The sets include correct resin ends and etched parts to correct/upgrade the underframe, side sill details, ladders, hatch cover supports, steps, etc. [there is a companion set for the R-40-26 that is in the works, as well; see undeframe photo below.] The other parts release is for the ITC 1937 AAR box cars with AC&F Carbuilder's ends and also includes resin details, etchings, and decals.

R-40-26 underframe floor casting... board-by-board!

Illinois Terminal AC&F Carbuilder's end for 1937 AAR box car (pre-production before changes)

Photo illustrating the extremely subtle ripples in the side sheathing of the PRR X43A

I am also charging ahead with some full kit offerings. The first is the Milwaukee 50' single sheathed auto cars that I teased awhile back. It will be released November 1st via the Speedwitch site (all decals, etchings, trucks, and other parts are already in house so they will ship immediately!) Another project is the Pullman-Standard-built Central of Georgia 10'0" inside height Emergency box car (PS if you have National Scale Car's set for the A&WP/WofA/Georgia, those decals will work on this model, as well.) If the CofGa offering proves popular, I will add Birmingham Southern, as well. I also have three PRR cars in the hopper: the G28, X43A and X45. The G28 is a project that I started years back. It will be a showstopper, with full underframe detail... and the underframe was a unique welded design with very interesting crossmembers so it bears full attention! The X43A was a 40', mostly postwar AAR design car, with welded sides. I have created patterns with extremely subtle waviness to the sides that I am extremely pleased with and they were unusual in the PRR universe in that they were delivered with black roofs. The last of these three is the X45, a proprietary PRR design for a 50' welded box car. I again added waviness to the sides and the Pennsy proprietary details, including the underframe, are really cool. 

The last of the full kits, but by no means least, and listed in its own paragraph, is a Western Pacific flat car built by AC&F in 1942 that is a fully 3D printed offering. It is spectacular. More details to follow on this gem...

A final tease... several years back I presented a clinic including details about scratchbuilding board-by-board patterns for single sheathed cars. I have been fruitlessly looking for those patterns for over a year. I thought they were lost in the past year's move. Well, a few weeks back, they were presented to me. Turns out I had sent them to someone along with a bunch of other stuff and they were returned! Here is the end for the car in question. IYKYK 

Illinois Terminal 1937 AAR Box Cars

 

The photo shown above (Karl Geffchen photo, Aug. 1978, from the Fallen Flags site) was posted to the Railroad Modeling the 1970s Group on facebook with a query about details. I posted an answer there, but thought these cars would make an interesting post overall. So, here goes. I will cover the photo above first even though it is the last chronologically, since it is the genesis of this post. It is an ITC 1937 AAR box car that was modified with a wider door opening (six feet to eight feet, although it's possible it's seven; my most "modern" ORER is only from '61 so I am uncertain; if you know, please leave a comment below) and a side sill support spanning from body bolster to body bolster as well as additional bracing where the door posts meet the side sills. Presumably, it also received the underframe modification as shown in the last photos below. Note that this car is one of the members of the group with AC&F proprietary ("Carbuilder's") ends.

East St. Louis, Illinois, 1938, R. J. Foster photo, from Joe Collias

ITC 6041 was from the first group of 1937 AAR box cars acquired by Illinois Terminal (car nos. 6000-6099, 100 cars.) They were built in 1937 by AC&F and were quite "standard" in their details, including Youngstown corrugated steel doors with early Camel Roller Lift fixtures, square corner Dreadnaught ends, Murphy rectangular panel roof, double truss spring plankless trucks, Ajax power hand brakes and wood running boards and brake steps.

American Car & Foundry photo

ITC 6299 was the last car in the second group of 1937 AAR box cars, also from AC&F and built in 1941 (6100-6299, 200 cars.) These had Youngstown doors with Camel fixtures, Murphy rectangular panel roof, double truss spring plankless trucks, Equipco power hand brakes, wood running boards and steel plate brake steps. What made them unusual were the round corner AC&F proprietary ends, as shown in several of the photos herein.

circa 1955, Paul Dunn photo

Circa the mid-1950s, many cars were fitted with side sill support extensions, as shown above as well as bracing where the door posts meet the side sills (click on photo for a larger view.) The door opening remained at six feet. The placard boards were also lowered, as shown.

ebay purchase, undated

At some point in the 60s, cars received heavier side sill support sections, spanning the body bolsters, as shown above and in the first photo of this post. The door openings were increased and the doors were replaced with improved Youngstown corrugated steel doors. The underframe stringers were also augmented. The cars originally had one zee bar stringer on each side of the center sills and between the bolsters and the end sills incorporated a diagonal brace at each corner. As shown, these were augmented with two I-section steel stringers on each side of the original stringers and three I-section stringers on each side of the draft gear, replacing the diagonal braces.

ebay purchase, undated

Late Steam Era 36-foot Box Cars

Jim Gerstley

Several months ago, I mentioned that I would post a list of 36-foot box cars that would be useful prototypes for late 1940s to early 1950s modelers (meaning that these cars were still operating in reasonable quantities, either in gross numbers or as a percentage of the road’s fleet.) Without much fanfare, here is the list, along with some photos, and HO scale model references where known.

Al Armitage photo

*Canadian National Dominion/Fowler Patent single sheathed box cars - the CN's cars including subsidiaries are too numerous to chronicle in a sentence; it is sufficient to say there were over 33,000 cars with many subtle detail differences; HO scale models from Speedwitch K104 kits (five-foot door opening), Westerfield, True Line Trains/LifeLike Canada, Accurail; Mainline Modeler, November 1985

Roseville, Calif., Oct 24, 1952, Col. Chet McCoid photo, Bob's Photo

*Canadian Pacific Dominion/Fowler Patent single sheathed box cars - like the CN, the CP had a massive fleet, with over 33,000 cars for itself and subsidiaries; too many to delineate in a sentence or paragraph; HO scale models from Westerfield, Accurail (six-foot door opening only); Mainline Modeler, June 1985

George Sisk photo, Charles Winters Collection

*Other Dominion/Fowler Patent single sheathed box cars, including Erie, NYS&W, NC&StL, PGE, Wabash, Soo, and others - Westerfield, Accurail; Mainline Modeler, April 1986

Delaware & Hudson double sheathed box cars profiled through the link included herein - models may be kit-scratchbashed or old Funaro & Camerlengo kits; Railroad Model Craftsman, November and December 1987

Bob's Photo

Erie single sheathed box cars (different from the Erie's Fowler/Dominion cars and more numerous in the late Steam Era). These cars were built by Standard Steel in 1921 and assigned to 93000-93999. They featured hat section pressed steel structural members as shown on Erie 93132 above. - no models at present

Harry Zillmer photo

Illinois Terminal 8100-8199 series single sheathed box cars built by Mt. Vernon in 1928. Note the Dalman Two-Level trucks (without Barber Lateral Motion devices) - Sunshine Models kits. 

Paterson, New Jersey, ca. 1947, Sirman Collection

Louisville & Nashville double sheathed box cars. Over the years, the Louisville & Nashville had thousands of such cars, with many subtle and not so subtle differences in characteristics. By the twilight of Steam, they were concentrated in two series: 8000-8999 and 10000-11999. Note the extensive damage to the door frame and roof at left edge of door in photo above - Sunshine Models

Missouri Pacific Lines double sheathed and rebuilt box cars. MP had cars as shown above well into the late 1940s and 1950 with many rebuilt into distinctive all-steel cars like MP 120050 shown at the top of this post - Sunshine Models; Railway Prototype Cyclopedia, Vol. 14.

Bob's Photo

New York Central System (NYC, B&A, P&LE) double sheathed box cars - Funaro & Camerlengo (general site link - search by road for specific kits), Accurail. F&C had a kit for this B&A car with Dreadnaught ends (I had one and gave it away to a friend recently as I have no need for more than one B&A car and my one is a USRA-design steel car.) 

Al Armitage photo

Southern (Mobile & Ohio and Lancaster & Chester) double sheathed truss box cars. These were incredibly numerous (almost 15,000 cars) and some of the last truss rod cars built - Westerfield, Funaro & Camerlengo; Railroad Model Craftsman March 2004

*Russ Pinchbeck and the late Stafford Swain presented a clinic about the Fowler/Dominion cars on the RPM circuit circa 2003 and included a detailed handout.

Eric Hansmann's blog Notes on Designing, Building, and Operating Model Railroads has much good information about 36-foot cars (particularly the NYC System cars produced by Accurail) as he is a 1920s-era modeler and his need for these cars is obvious!

Below are a few models. From top to bottom, Westerfield, Speedwitch, Westerfield