Photos of the completed ATSF Bx-34

 

Here are some photos of my completed Santa Fe Bx-34 Modified 1937 AAR box car with Duryea Cushion underframe. The model was built using a Sunshine kit combined with Speedwitch parts (1959+ lettering.) I finished the model using Polly Scale mineral red for the majority of the car body plus Tamiya black for the roof.

The intention was to keep the weathering fairly modest. I applied some streaks using artists' oils dabbed on and brushed down the side using mineral spirits. I also added some light washes, again with thinned artists' oils. These were sealed with flat coats. I then added some sparing and selective applications of PanPastels and Bragdon powders, mostly to the roof, underframe, and trucks. The chalkmarks are from National Scale Car and the routing cards are from Owl Mountain. Excessive "unremoved" dust on the photo above courtesy of myself!

Where we are at...

 

I am typing this from an almost horizontal position. I was supposed to be arriving at Naperville today, but my balky back made other plans. So, I type this from home. It's been a couple months or so since I started things back up in earnest, including casting. As the "RPM season" sets in, I thought it a good time to share a little bit about what's coming over the next few months.

Some old Speedwitch stuff turned up: DT&I gondola, MEC ARA box car parts, NYC stock car roof and 50' combination rectangular and diagonal panel roof (some prototype details here.)

Parts sets have proven to be a good way to dip my toes in the casting pool. I mostly learned a few things about what shape of mold works best for me and how I like a few varieties of silicone. I am adding a couple wrinkles to the existing offerings. First, for the ATSF Bx-34 parts I have added the 1959-1970s scheme, illustrated in the photo at the top of the page. In addition, I have added Shadow Keystone decals covering 1950s+ schemes for the PRR X32A parts. 

This and the following three photos are of the R-40-25 parts

On the parts front, there are also a couple other offerings nearing release. The first is the PFE R-40-25. This set is intended for an undecorated Intermountain R-40-23 kit or any Amarillo/Intermountain PFE R-40-25 that is NOT the delivery scheme as the UP medallions on those cars are incorrect (I will share info on that when these parts are released.) The sets include correct resin ends and etched parts to correct/upgrade the underframe, side sill details, ladders, hatch cover supports, steps, etc. [there is a companion set for the R-40-26 that is in the works, as well; see undeframe photo below.] The other parts release is for the ITC 1937 AAR box cars with AC&F Carbuilder's ends and also includes resin details, etchings, and decals.

R-40-26 underframe floor casting... board-by-board!

Illinois Terminal AC&F Carbuilder's end for 1937 AAR box car (pre-production before changes)

Photo illustrating the extremely subtle ripples in the side sheathing of the PRR X43A

I am also charging ahead with some full kit offerings. The first is the Milwaukee 50' single sheathed auto cars that I teased awhile back. It will be released November 1st via the Speedwitch site (all decals, etchings, trucks, and other parts are already in house so they will ship immediately!) Another project is the Pullman-Standard-built Central of Georgia 10'0" inside height Emergency box car (PS if you have National Scale Car's set for the A&WP/WofA/Georgia, those decals will work on this model, as well.) If the CofGa offering proves popular, I will add Birmingham Southern, as well. I also have three PRR cars in the hopper: the G28, X43A and X45. The G28 is a project that I started years back. It will be a showstopper, with full underframe detail... and the underframe was a unique welded design with very interesting crossmembers so it bears full attention! The X43A was a 40', mostly postwar AAR design car, with welded sides. I have created patterns with extremely subtle waviness to the sides that I am extremely pleased with and they were unusual in the PRR universe in that they were delivered with black roofs. The last of these three is the X45, a proprietary PRR design for a 50' welded box car. I again added waviness to the sides and the Pennsy proprietary details, including the underframe, are really cool. 

The last of the full kits, but by no means least, and listed in its own paragraph, is a Western Pacific flat car built by AC&F in 1942 that is a fully 3D printed offering. It is spectacular. More details to follow on this gem...

A final tease... several years back I presented a clinic including details about scratchbuilding board-by-board patterns for single sheathed cars. I have been fruitlessly looking for those patterns for over a year. I thought they were lost in the past year's move. Well, a few weeks back, they were presented to me. Turns out I had sent them to someone along with a bunch of other stuff and they were returned! Here is the end for the car in question. IYKYK 

Santa Fe Bx-34 Modified 1937 AAR Box Car

 

August 5, 1947, PRR siding, Division St., Harrisburg, Pennsylvania, Bob Charles Collection, Kalmbach Memorial Library

I thought a fitting addendum to my previous post would be one highlighting the prototype that was announced, the Santa Fe's Class Bx-34 Modified 1937 AAR box cars. The Santa Fe was the largest owner of Modified 1937 AAR box cars (10'4" to 10'6" inside height and 5/5 Dreadnaught ends, almost exclusively round corner.) The first 1,801 cars, delivered in 1940, were equipped with the Duryea Cushion underframe, like the vast majority of new Santa Fe box and refrigerator cars built in the mid-30s to 1940. The cars were assigned to number series 139500-141300.

Illinois Digital Archives, Pullman History site

The cars received the map scheme, with the first group of cars carrying the "curved" map and the remainder painted with the "straight" map (ATSF 140793 at top sports the curved map while ATSF 140377 directly above carries the straight map*; I could likely be more specific, but my copies of Dobyne's Santa Fe box cars and Hendrickson's Santa Fe freight car painting and lettering books are in boxes somewhere in the house - if you have that info and can post a comment, I will update in the body of the text here. thank you.) The first 1,200 cars received American Steel Foundries spring plankless trucks while the remainder used National Type B-1 trucks. Youngstown doors with Camel fixtures, Ajax power hand brakes, Apex Tri-Lok brake steps, and wood running boards rounded out the main specialties. The roofs were treated with slate granules while the paint was still wet, giving them a pronounced dark grey to black appearance.

This later repaint circa 1959 displays lowered placard and route card boards of a different style than as built, as well as a more modern scheme

These cars (and many other Santa Fe AAR-design cars) featured other unusual details that collectively resulted in distinctive cars. The placard and route card boards on these cars had beveled (or perhaps rounded) top and bottom edges and used brackets with mounts that incorporated "ears" or tabs with holes for rivets to attach to the doors or ends. The top of the right stile on the side ladders was shorter than the left, presumably as a safety feature when a carman swung his foot/leg around when at the top of the car. While these cars had push pole pockets on the ends at the lower corners, they did not have short angle sections below the ladders, as most cars with push pole pockets did; rather, the sill steps mounted to the bottom of the side sill and corners. These cars did not use bracket-type grab irons either, unusual by 1940. Likely due to the four pairs of crossbearers of the Duryea (as opposed to the typical AAR underframe) they used a shorter side sill support section under the door. In the aggregate, the underframe plus these other features make for distinctive prototypes worthy of detailed models.

*images I have of ATSF 140185, 140177, 140809, and 141106 all carry the curved map

New Product and Speedwitch Goings On

Santa Fe Bx-34, Otto Perry photo, Denver Public Library

It's been awhile since I have posted anything about the state of affairs at Speedwitch (or posted much about other things, as well.) Since late last autumn and continuing as I type this, there has been no shortage of things that have limited my ability to do much of anything. The house in Brooklyn has been sold after a ton of work to get it ready (I relinquished my workspace there back in late November.) There has been a steady back and forth between there and the upstate house with a full carload each time. I have been spending most of my weeks upstate, but weekends have been back and forth to Brooklyn. My workspace upstate is what I would call nomadic at best since it is temporary and occupied on and off by a neverending stream of plumbers, electricians, builders, etc., doing work on the house. I spend my days dodging them and trying my best to work on patterns and become adept (enough) at resin casting. My better half still works in NYC, so we had to move her to an apartment over the past few weeks. Oddly (for me) I had several illnesses over the past six months that have sidelined me for the better part of three weeks. I have been frustrated at times, but persistence overcomes resistance...

Santa Fe Bx-34 Duryea Cushion underframe

All that said, there are things coming. I am starting slowly on the resin casting front, with a few parts sets to get my casting chops established. They include the most detailed Duryea underframe I am aware of (regardless of scale) for the Santa Fe's Bx-34 modified 1937 AAR box cars (details via this link) and a significant upgrade for the Intermountain/Amarillo PFE R-40-25, including correct ends and enhancements for details including the ladders, underframe, side sill supports, hatch cover rests, bunker drains, and other details. The last set is upgrade parts for the Bowser Pennsy X32 50' "round roof" cars. While these parts sets include plenty of "extreme" detail, in the parlance of Bill Welch, there are some suggested shortcuts to make them quicker and easier to build, if that is your desire.

Santa Fe Bx-34 end

On the full kit front, I will share a separate post in a few weeks detailing those plans. Much is dependent upon how quickly I feel comfortable with the casting process. While I am thoroughly enjoying the resin casting process I don't want to get too far ahead of myself lest I have to eat a giant helping of crow, but I am having fun (it is much like being in the darkroom... you do a few things that seem to involve process as well as voodoo and magic and end up with really cool results!)