Saturday, December 29, 2018

Prototype Rails 2019


Two weekends from now, the 2019 iteration of Prototype Rails or "Cocoa Beach" as it's known in the RPM community, will be held on January 10 through 12. I am extremely excited as I was unable to attend last year's festivities because of the whims of Ma Nature. The event has a flavor all its own, with a relaxed atmosphere, good (or better) weather than what most attendees are dealing with in early January, excellent clinics, diverse restaurant options, a wonderful hotel, and numerous other attractions in the area if you're seeking to make a vacation out of the trip.

I will be presenting a clinic on kitbashing and also co-presenting a photography clinic with Bill Welch. The photo included here will feature prominently in both clinics; I will be discussing how I kitbashed this 45' Missouri Pacific flat car and will also discuss how I photographed it (hint: depth of field can be a challenge when photographing subjects in miniature.)

I hope to see you there. If not, I will be posting my clinic files here after the meet...

Thursday, December 27, 2018

Kadee Lake Superior & Ishpeming 40' PS-1 Box Car LS&I 2236... or my latest "ready-to-run" project

I was so satisfied with the results of my Santa Fe Kadee PS-1 that I thought I would add another that, excepting weathering, would be a more ready-to-run project than the Bx-57 proved to be. I had seen photos of LS&I PS-1s from Kadee and liked the look of the black ends and red and white diamond emblem. Although they are no longer available, I easily tracked one down on ebay. As soon as I received the car, I opened the plastic box and compared it to the one prototype photo in my collection (which I had not really looked at too closely until that moment.) Imagine my surprise when I discovered I had another "not-so" ready-to-run project on my hands! Time to make more lemonade out of lemons...


The sides require some detailing changes. I must add roping staples, that look to have been welded to the bolster tabs rather than riveted, although that must be confirmed. I also need to add tab sections at the lower corners. The placard boards on the model are in a different location than they were on the prototype so I will repeat my efforts as on the Santa Fe car, with Southwest Scale doors and new placard boards.

On the ends, I will have to make a few changes, as well. There were push pole pockets at the lower corners that will be scratchbuilt. The uncoupling rod bracket was different on the LS&I cars. Finally, the lower portion of the right ladder stile had a "jog" in a different location. I am hopeful the new early PS-1 cars from Kadee have ladders with this feature. If not, I will ignore that subtlety. 

Stay tuned as I modify this otherwise beautiful model.

Are we having fun yet and when will I have an actual ready-to-run car???

Monday, December 24, 2018

Finishing NP 10975 - Rapido Northern Pacific 10000-series Double Sheathed Box Cars, Part 2

I posted a brief writeup of the Rapido Northern Pacific 10000-series double sheathed box car almost two months ago (link to that post here). Since that time, I have made a few upgrades to that model and painted, lettered, and weathered it. This post describes the details associated with all of that. As I stated in the original post, it is an extremely fine model right out of the box. The changes highlighted here are ones that simply suit my tastes.


Most of the upgrades were performed on the ends, with the majority of those specifically on the B end. I replaced the running board supports with styrene to create more realistic details. I replaced the original retainer with a Precision Scale retainer valve with 0.008" wire "pipe". The brake staff was secured to a pivot support. Finally, I reworked the push pole pockets to create a more dished, stamped look, as on the prototype.


On the A end and the doors, I replaced the handles with ones fashioned from 0.010" wire, filed flat on the outer surface. The last upgrade was the replacement of the stock wheelsets with 0.088" tread width sets with 1.005" long axles.


The preparation and painting of the model followed my normal regimen. All metal and engineering plastic surfaces were lightly blasted with 200-grit aluminum oxide. I primed all surfaces, using Tamiya surface primer for the first time (link to my thoughts on it here). I painted the sides Rust (no. 4675) from the Model Master Acrylic line of paints. I masked the sides and painted the roof, ends, underframe, truck sideframes, and wheelsets Tamiya acrylic flat black. In preparation for decaling, I applied a light coat of Future (now Pledge) floor wax, creating a glossy surface.

I lettered the car* using decals I created myself and had printed by PDC of Canada specifically for this model. I reserved part of the capacity data, the reweigh location, the brake test, and repack stencils to be added during the weathering process. I also added a few chalkmarks prior to weathering.


I weathered the model using PanPastel and Bragdon powders. On the roof, ends, and underframe, I used brown, light grey, and Payne's grey. On the roof, I also interspersed this with some "blobs" of light grey paint applied with a Q-tip to simulate the beginnings of paint failure on some of the panels. I used the same powders on the sides, but applied them progressively: first, I applied small pieces of masking tape over the stencil areas referenced in the previous paragraph followed by powders that were then sealed with clear flat. I removed the masking from capacity, reweigh, and brake test stencils and added those along with more chalkmarks, another clear flat coat, followed by more weathering and yet another clear flat coat. Lastly, I added the repack stencils and more chalkmarks. Everything was sealed with a final flat coat.


Rapido has produced a beautiful model of a very significant prototype that belongs on most layouts. Bravo and I can't wait to see what is next from north of the border!

*the lettering layout doesn't exactly follow the standards for this car. The arched Northern Pacific and capacity data are slightly shifted to reflect photos of car NP 10975. Variations in the layout of lettering on actual equipment are not uncommon... remember, the shop crews were humans, not robots!

Thursday, December 6, 2018

Airbrushing - getting started



Airbrushing is one of the tools at the gateway to advanced modeling. However, many of us who have never experimented with using an airbrush look at it as a skill shrouded in mystery, requiring some innate talent and/or voodoo. Nothing could be further from the truth, particularly for the painting most model railroaders do, with single (or maybe two) colors with minimal masking and no real embellishments (if you really want to be impressed, look at some of the World War II aircraft schemes, including Luftwaffe schemes with various blotches/mottling or the Italian scheme with green “smoke ring” camouflage - link to decal for the less adventurous who don’t want to airbrush these devils, but illustrates what military modelers can do!) For what we as railroad modelers do it is simply a matter of spraying paint.

First, the intent of this post is to recommend a quality, but reasonably priced airbrush. I own and use an Iwata Medea N4500 Neo Gravity Feed airbrush. New ones can be found on eBay for approximately $50. It is extremely well-made and uses metal parts rather than plastic (an important consideration for me). It is a “double action” airbrush, meaning that the “trigger” controls both air and paint flow. This is a little more complicated than a single action airbrush, but I started using a double action airbrush when I was 10 years old and never felt like it was too difficult. I am certain you can learn to use it easily too. The one other thing I will say that is attractive to me about this model is that it disassembles easily, allowing the entire mechanism to be cleaned hassle-free. This is important because airbrush longevity and smooth operation requires a good cleaning regimen after each use. It takes only a few moments, but the impacts on operation are worth the diligence. One note: I have owned more expensive airbrushes, including the Iwata Revolution and Eclipse models and they are more difficult to clean and offer no advantages for the type of painting we do. My recommendation: buy the Neo and use the savings to invest in a quality airbrush compressor (buy an airbrush compressor and you won’t need earplugs because you’re trying to airbrush with that Campbell-Hausfield 100 HP compressor that you use to power your nail gun!)

If you’re read this far and are still curious, then take the plunge. All that’s required to learn is some paint (I recommend either Model Master acrylic or Tamiya acrylic paints,) thinner (most paints are too viscous out of the bottle; I thin these two brands using the manufacturers’ thinners at about 60% paint to 40% thinner,) an air source (I recommend this compressor,) and something to paint. To learn I suggest practicing on plain sheets of 0.040” white styrene. The point is to understand air pressure settings, distance from the object being painted, paint flow relative to the trigger, and how slowly or quickly to move the airbrush to avoid adding too much paint to one area at once. That’s it. I will post more in future on this topic, but it’s one of those things where it’s easier to learn by doing than reading.

Wednesday, December 5, 2018

Wordy Wednesday - Chicago, St. Paul, Minneapolis & Omaha Postwar AAR Box Car CMO 37836


In 1945, Chicago and North Western subsidiary Chicago, St. Paul, Minneapolis & Omaha purchased 400 AAR-design box cars of the postwar iteration from American Car & Foundry. The cars were assigned to series 37500-38298, even numbers. At first blush, the cars hewed closely to the design, with 10-panel riveted sides, Murphy rectangular panel roofs, 4/4 Improved Dreadnaught ends, and Youngstown corrugated (first 200 cars, shown here) or Superior panel steel doors (last 200 cars) and riding on ASF A-3 Ride Control trucks. Their most distinguishing characteristic was the Duryea Cushion underframe, with deep crossbearers that are visible in this photo, and Universal brake adjuster, a portion of which is also visible just to the right of the AB valve. However, the most interesting detail to me is the extreme compression of the truck springs (see below), no doubt due to a heavy load. It’s not something one sees often, let alone notices.


The photo is yet another low-angle, late-in-the-day flat light gem from Col. Chet McCoid that quite literally sheds light on so many details. Also note the gas storage tanks at both left and right. San Diego, California, November 19, 1954, Bob’s Photo


Thursday, November 29, 2018

Tamiya Liquid Surface Primer

Serendipity seems to make frequent visits to my hobby. Something I will be working on will make its way to the various lists that I follow, wholly unrelated to any activities or prompting by me. Such was the case within the last couple weeks. I recently purchased a bottle of the Tamiya primer shown in the photo above and within a couple days there was a discussion about primer and priming models on the Steam Freight Car list (my thoughts on that debate below). It is a rather thick surface preparation mixture, similar to the Mr. Surfacer products from Gunze-Sangyo (I am a raving fan of these products). When I looked at the bottle shown here, it noted that it could be thinned with Tamiya Lacquer thinner. I decided to give it a shot. I thinned it heavily with Dupont Lacquer Thinner, a premium thinner that I had purchased in a gallon container many years ago from an auto body repair shop. The ratio I used was about 60% thinner to 40% primer. I used it to prime an undecorated Rapido NP double sheathed box car. It sprayed beautifully, with excellent coverage and a flawless surface finish. It will be a go-to primer for my efforts.

On the subject of priming models, I fall decidedly into the yes category. A coat of primer does two things for me. It creates a neutral base that eases the coverage of the final color, be it freight car red or brown, some flavor or reefer yellow or orange, or even plain black. The other benefit is that it makes all details "pop" or stand out. This helps to reveal any and all surface defects and imperfections that need to be addressed prior to applying the main color(s).

Wednesday, November 28, 2018

Wordy Wednesday - Shell Filling Station


Shasta County, California. Filling stations close up as the tourist trade decreases, June, 1942, Lee Russell
As I begin my preparations for construction of a modest switching layout, I have been taking increased note of things that will be valuable references. It is little surprise that anything that will aid in my construction and detailing of structures and the scenes in which they’ll reside gets attention. I stumbled across this photo on the FSA-OWI photo site hosted by the Library of Congress. It is a defunct filling station in northern California (extreme northern, relatively close to Oregon, where I am modeling). Granted, the gasoline sales portion of the station and the accompanying equipment appeared to have been removed by the time this photo was recorded in 1942. Note that in the background at left is what to all appearances is a functioning gas station.

Nonetheless, there is still a great deal to be gleaned from this photo. Architecturally, the photo illustrates a large portion of the structure of the overhang that sheltered patrons while pumping gas. Details include the embellishments at the junctions of the roof line, support post beams and other areas. These were not only attractive features, but also served to tie together and strengthen the structure at critical points. As was quite common, the roof line of the shelter (and the shelter itself) was oriented to bisect the 90-degree angle created by the intersection of the streets.

Details abound. The large SHELL sign atop the shelter would be a great touch to add to a model, including the support wires, extending to the roof eaves. The Quaker State lube service sign is another add-on to accent the scene. Finally, while every window in this scene has one, likely due to the “hibernation” of the station’s gas dispensing operations, the signs promoting the Russell Bros. Circus in Redding (California) on June 27 are a great detail that adds “life” to this scene, and could be similarly replicated on a model, albeit in maybe one or two signs.

The great thing is that there are numerous commercially available 1920s vintage gas station kits that follow this general design, but that could be easily and minimally modified using a photo such as this one to make it “one’s own” so that visitors to the layout will appreciate its uniqueness rather than mentally noting that the gas station is the same one seen on many layouts.