Monday, October 8, 2018

Kadee Santa Fe Class Bx-57 40' PS-1 Box Car



When Kadee released this model of the Santa Fe Bx-57, I eagerly ordered one, thinking I could easily add a ready-to-run (RTR) car to the fleet. It’s rare that I find a model that meets my standards and is RTR, so I was thrilled to have it. I was recently in the process of finishing a few models and decided it was a good time to add a little weathering to this model so that it would be “complete”. Easy, or so I thought...

I did have a question about the trucks. I was curious if the trucks were black or mineral red. I consulted with Ed Hawkins and while he did not have specific information about this group of cars, he opined that if they followed Santa Fe practices of the period ordered from AC&F, then the trucks should be mineral red. So, I sandblasted the sideframes and wheelsets and while I was doing that, I also blasted the ladders, grabs, running boards, brake steps, hand brake and housing, underframe components, and other engineering plastic parts to aid in the adhesion of a flat coat to be applied prior to weathering the model. On the sides and ends, I masked the areas adjacent to the ones to be blasted to prevent lettering from being removed erroneously. The photo above shows the side after the ladders and bracket grabs were blasted. The transition from the unblasted area to the blasted area is clearly discernible near the ladder, due to more advantageous lighting at that part of the car.
Kadee and Southwest Scale Productions Improved Youngstown doors shown side-by-side for comparison
I referred to my copy of John Dobyne’s Santa Fe Boxcars 1869-1953 (currently out of print) to make sure the locations of the placard and route card boards on the model’s doors matched the prototype. Not only did they not match, but the doors on the model did not match the prototype -- see photo above. The Bx-57 used the “upside-down” version of the Improved Youngstown door, not the version on the model. Fortunately, there is a version of the door available in HO that is every bit as finely rendered as the details on the Kadee PS-1, making it a perfect complement. The door I am referring to is available from Southwest Scale as part number FC-622. The door is slightly shorter than the Kadee part, but the prototype’s door roller track is actually taller than the version on the model, so all is not lost.
New door and roller track plus placard and route card boards installed, masked, and ready to be painted to match the car body.
I removed the doors from the Kadee model. I also carefully removed the lower door tracks. I applied a coat of Mr. Surfacer 1200 and once that had dried, I carefully wet sanded the area with 400 followed by 600-grit sandpapers to clean up any telltale traces of the door guides or my poor removal of the guides. I glued the Southwest Scale doors to the Kadee model, using sparing amounts of MEK.

The door roller tracks were fashioned in a few steps. First, I added mounting “brackets” for the tracks. These were created by adding bits of 2x2 to a 0.005" styrene strip that was 2 scale inches wide. For simplicity, I created a long strip of 2 scale scale inch wide 0.005" strip and added the 2x2 bits to the strip. I removed the brackets one at a time as needed, adding 7 for each door. I added the four under the door opening first, followed by adding the 1x3 guide. I added the 3 outer brackets last, sliding them under the 1x3 guide, all the while making sure that the guide remained straight.

The placement of these brackets along the side sills corresponds to the location of rivets on the faces of the door roller tracks as shown in the photos of these cars in Dobyne’s book. The door roller track is a strip of HO scale 1x3 styrene glued to the brackets. I completed these tracks by adding rivets in the appropriate locations.

One last detail for the doors was the placard and route card styrene boards. These were scratchbuilt. The basic placard board was constructed from 1x3, 1x6, 1x6, and 1x3, glued edge-to-edge to create a 18" height, all glued to a 0.005" backing. I trimmed these to a length of 27". I then added the frame/mounting brackets using 2" wide strips of 0.005". The route card boards were created from single pieces of 1x6 12 scale inches in length, glued to a 0.005" backing. The frame/mounting brackets were again created from 2" wide strips of 0.005" styrene.

I had also wanted to add a piece of small chain between the brake cylinder and lever to capture that nice look of a dangling chain when viewed from the side. I was not aware of how easy it is to remove the center sills, crossbearers, and crossties in one part, with little effect on the overall underframe detail. So, I decided to upgrade all the AB brake details, as I was going to paint the underbody and details (as well as the doors and tracks) mineral red. I removed the Kadee brake details and added the aftermarket parts and wire, as shown.

An additional "construction" detail that will be covered in the next and final installment on this car is the replacement of the running boards. The model came with an Apex Tri-Lok running board. Kadee has since released a U.S. Gypsum Expanded Metal running board that is accurate for the Bx-57. I will also provide details about my paint matching efforts, as I feel that the color I used is extremely close to the factory model, and will be virtually indistinguishable with a small amount of weathering.

Thursday, October 4, 2018

PRM5 Teaser

While Prototype Railroad Modeling, Volume Five won't be ready for a couple of months, I thought I'd post a teaser of one of the projects. The Missouri Pacific had a group of 100 flat cars, nos. 8000-8099, that were similar to most of the road's other cars in the 41-42 foot range, not unlike many other roads' flat cars. However, this group of cars was 45 feet in length. This is an appealing length as it falls between the far more common 40-42 and 50-53 foot lengths. After obtaining drawings from the Museum of Transportation, it became apparent that these cars could be kitbashed from two Red Caboose flat cars, confirming my suspicions.

The kitbashes also include much re-detailing, such as replacement of the stake pockets with modified Tichy stake pockets, which are close, but not an exact match, and new scratchbuilt crossbearers. The article in PRM5 will have many photos and accompanying text to help you model these "mid-length" flat cars.

Wednesday, October 3, 2018

Wordy Wednesday

CP 241170, San Diego, California, October 9, 1954, Col. Chet McCoid photo, Bob's Photo
This installment of Wordy Wednesday is another of the fine photos by Col. Chet McCoid recorded in San Diego. The Canadian Pacific had 7,500 of these distinctive box cars, built in 1929-1930. They had a unique combination of characteristics that made them stand out in any consist, including five-foot door openings, an inside height of only 8'6", and the first known use of L (angle) side sills with tabbed, channel section supports at the body bolsters and under the door openings. They were also (somewhat) more "stylish" for their use of the Murphy radial roof and Dalman two-level trucks (on some cars, including the one shown above).



HO scale modelers are fortunate to have fine resin versions of these cars, originally marketed under the Yankee Clipper name and subsequently absorbed into the Funaro & Camerlengo line. The model shown here is one I built about a decade ago (or more, give or take) and featured in the "Essential Freight Cars" series in Railroad Model Craftsman.

P.S. read this article about the fates, both good and bad, of several stations.

Sunday, September 30, 2018

Handling Kadee HGC Trucks


Many of us have welcomed Kadee's High Gravity Compound (HGC) trucks with open arms. They are beautifully rendered representations of useful prototypes, eliminate the toy-like, see-through truck springs, and have a weight near their metal cousins due to the HGC material. 

One thing about them that can be maddening is handling them when they are not screwed into a car. They can be like slippery eels as there is nothing holding them together. When purchased as separate trucks, they come with small clips that sit on the screw threads. However, these clips can easily become detached when handling. I am working on painting a pair of sideframes from a PS-1 and came up with a simple solution to keep them together until I get them screwed into the car body. I drilled a hole with a no. 50 drill bit through a piece of 0.030" x 0.188" styrene (although any suitable piece of styrene or even rod will work). I then screwed the truck screw into the piece of styrene. This holds the truck together and allows for handling while I paint and weather the sideframes. Problem solved.

Thursday, September 27, 2018

Scratch Brushes

Scratch brushes: brass, at top, with "bristles" extended and fiberglass, at bottom, with "bristles" retracted
Almost two months ago, I was reading John Golden's blog, Railroad Prototype Modeler, and came across the post, "New York Central ARA Hoppers." Like most of John's posts, it was an entertaining and worthwhile read. However, the thing that caught my attention most was a reference a little over halfway through the post to a "fiberglass scraper tool" that John had recently purchased. I filed that information away and made a mental note to check the local art supply stores when I had occasion to visit them. I discovered that none of my local stores (or any art stores) stock them. 

They are designed to remove buildup of oxidation (and crud) from jewelry. Their proper name is a scratch brush. I ended up ordering one each of the fiberglass and brass variants from Amazon (I am actually an Amazon Prime member to get their data storage, but loathe giving money to the overlords Amazon, so I must have really wanted these tools...) 

In addition to fiberglass and brass, steel "bristles" are another option. Replacement bristles can be ordered as needed. These tools are about the size and shape of pens. By turning the top of the handle, one can extend or retract the bristles. The shorter the bristles, the more roughly they "score" the surface. After about two strokes across a styrene flat car deck, I realized these are amazing tools for weathering. I cannot recommend them highly enough. I will provide a separate post that highlights some of their capabilities. Until then, buy some of your own and use them liberally.

Wednesday, September 26, 2018

Wordy Wednesday - Pere Marquette 83332

San Diego, California, November 22, 1954, Col. Chet McCoid photo, Bob's Photo Collection
A couple Wednesdays ago, I posted an image and promised that I would endeavor to become a more regular Wednesday poster with some of my favorite images. Many of my peers post "Wordless Wednesday" content. I am going to take that idea, but go in a slightly different direction by providing some background text, as well, creating "Wordy Wednesday" posts. They won't be terribly wordy, but in contrast to the wordless posts of others, they will be wordy. Hence, the modifier "wordy".

About the photo... this is the first of what will be many images from Col. Chet McCoid during his wanderings in San Diego. Many of his photos from there were recorded when the light was low and the subjects rendered relatively low contrast and saturated, perfect for highlighting subtleties such as surface details and weathering. Pere Marquette 83332 was built in 1930 by Standard Steel Car Company as part of a group of 1,500 cars, nos. 82000-83499. The cars followed the "Modified" ARA design (based upon 1923 ARA and closely related X29 designs), but with the crossbearers located under the door posts in what would become the "standard" location. This design was ordered by other Van Sweringen roads C&O and Erie, as well. The PM versions used the Hutchins Dry Lading roof, a departure from the cars on their cousins' lines.

Yankee Clipper offered HO scale resin kits of these cars many years ago. They are currently unavailable in the Funaro & Camerlengo line. I am fortunate to have one in my unbuilt kit inventory that will become one of my two "signature" PM cars when I build it. The other is one of the single sheathed automobile cars.

For more about these Pere Marquette prototype box cars, see "Pere Marquette 1930 Steel Box Car" by Jeffrey Koeller in Mainline Modeler, May 2001.

Monday, September 24, 2018

2018 Mid-Atlantic RPM

The largest and most impressive model was the MV Danica Marie as created by host, Bernie Kempinski
This past weekend, I attended the Mid-Atlantic RPM held at the DoubleTree Baltimore-BWI Airport. I had last attended the meet a few years ago at its old location in Fredericksburg, Virginia. While the Fredericksburg meet was enjoyable, it likely suffered from its location and attendance was not large in numerical terms. This year's meet seemed, to this attendee, to have a greater turnout. I believe it was due to relocating to the area between Baltimore and DC. The clinics were of high caliber and the models on display were also high quality. Lastly, and not a trivial concern, is the fact that the hotel had good facilities, good lighting, as well as a restaurant and bar on the premises. Should Bernie and his team decide to continue the event, I have little doubt that it will grow given all these factors. I can certainly recommend it as a weekend well-spent!
I believe this scratchbuilt structure was the work of Stanley McAdoo...
... as was this Norfolk Southern SD70M
Bernie Kempinski showed off his fine etchings on the sides of these large auto loaders
Ralph DeBlasi brought several flat cars with interesting loads
Jerry Dembeck built one of the interesting PFE R-70-2s from a Sunshine kit
Fritz Dahlin created interesting aluminum bales from the real stuff...
... as well as resin interiors for his car models.
Brad Trenkamp displayed this incredible in-progress model of the American Can Company
It is scratchbuilt and features photos of real windows for the window sections. The effect is highly realistic and lends a usually unseen "3D" character to that element of the model. My favorite model from the meet!
Tom Devenny had a large number of freight cars on display, including this realistically weathered Branchline kit of a DT&I box car
He also detailed a Con-Cor model of an ACL ventilator, proving that toy trains can be modified into prototypical miniatures, too
Ted Dilorio conducted a hand-on weathering clinic and had models to illustrate his techniques
Todd Hermann displayed beautiful models of the CQ Tower and Maintainers' buildings at milepost 97 on the Lehigh Valley in West Catasauqua, PA, circa 1956
As always, Bill Hanley shared his highly details B&O models
Adam Henry flew the banner for N Scale with this Ma & Pa CF7 conversion... 
... as well as this scratchbuilt model of the lime loadout at the Vulcan Quarry in Hanover, PA
Butch Eyler held court promoting the virtues of Gouache as a medium for weathering (I agree)
At an adjacent table, Ted Dilorio and Ralph Heiss also offered hands-on weathering
Tom Potthast showed some S scale models, including this bridge from castings by Tom Meisner and custom decals for Landsdowne Avenue in St. Louis
Tom also brought this S Helper SW-9 decorated for Frisco
Adam Chilcote displayed this Penn Central with a structural load...
... as well as this NYC AAR 70-ton flat with highly realistically weathered deck.