Pacific Fruit Express R-40-25 Refrigerator Cars

 

The placard held by the gentleman at center reads, "Here she is boss. She looks mighty fine and so will the other 499.The crew that built her." This is presumably the Colton, Calif. PFE shop crew

For modelers, the PFE R-40-25 class has taken a back seat to the more numerous R-40-23 and different, e.g. visually interesting, R-40-26, with flush mounting ("plug") doors. The R-40-25 class was 3,000 cars total, nos., 2001-5000, built in 1949 at the PFE's Los Angeles (2001-3350,) Colton (3351-4000,) and Roseville (4001-5000,) shops. The Intermountain models of the R-40-23 went a long way toward filling the needs of postwar Transition era modelers. In cooperation with Intermountain, the Amarillo Railroad Museum offered R-40-25 kits based upon the R-40-23. While this is certainly a good path to follow, it resulted in models that incorporated several errors, both large and small, that make these kits stand-ins for discerning freight modelers.

The B end of R-40-25 no. 2001. Of note are the uppermost main rib, with flat bottom, the narrow pressed rib at the top, and the arrangement of the side ladder, attached to the sill step at the bottom, which is in turn attached to the bottom of the side sill as well as the attachment of the ladder stiles at the top, using curved pieces of metal connected to the roof. The side ladders are not actually attached to the car sides at all.

End from an R-40-25 kit

Resin end from Speedwitch

Incorrect (and poorly rendered) lettering on Intermountain/Amarillo R-40-25

The largest of the errors are in the ends and the as-delivered lettering. The ends of the -25 class were an iteration of the improved Dreadnaught end and different than those of the -23 class. Changes included the incorporation of a small, rectangular stiffener bulge at the top of the end and revision to the main top rib, making it straight across its bottom and shallower in relief from the surface of the end, compared to the other five main ribs. The Amarillo ends tooled by Intermountain ignored the change to the top main rib and the small rectangular rib appears too proud from the surface of the end and not wide enough from top to bottom.

PFE R-40-25 no. 4246 as it appeared soon after repainting at Tucson, Ariz., in May, 1953

The other major error is the lettering on the as-delivered cars. In 1948, the Union Pacific medallion was changed from red, white and blue to black and white. This change was missed for years by researchers and modelers alike. It was only after I started to see the medallion in color photos and then shared that info and consulted with Dick Harley that the error was revealed. There is no blame in this, but it doesn't change the fact that the models are incorrect on that detail. Fortunately, there are now decals that correct that issue, from National Scale Car.

This image was recorded at a time of day when the sun's light was low, affording a great view of numerous details, especially the underframe.

The other issues are more nuanced and involve finer points of detail. Here they are in no particular order:

• the side ladders should be integrated with the lower sill steps and attached to the edge of the roof via a trapezoidal, curved piece of plate (the Amarillo/IM -25 cars took a half-stab at this issue)
• the side sill supports ("tabs") should be shaped differently; additionally, the Intermountain long tabs under the doors do not have a flat surface, but a wavy one due to the molding process
• the welded underframe is quite distinctive (on the -23, -25 and -26) and the Intermountain underframe is rather simple
• the drains for the bunkers are very crude on the IM kit

This is a stop frame screen shot from a video on the PeriscopeFilm channel on youtube... that I cannot find now to provide the title! [if I do, I will update this post.] However, it is a great illustration of the black & white '1948' Union Pacific medallion.

A little more about the '1948' PFE painting and lettering... in 1948, the word "VENTILATED" was dropped from the stenciling between the two medallions. If looking at a black & white photo, that change is a fairly good yardstick to determine if the UP medallion is red/white/blue (VENTILATED REFRIGERATOR) or black & white (only stenciled with REFRIGERATOR.) However, that is not a hard and fast rule, as I have found a few examples of cars stenciled with "VENTILATED REFRIGERATOR" and having black & white UP medallions. These examples are likely artifacts of errors immediately after the change was implemented. [note: what I have never encountered in photos, and I have closely examined a LOT of color photos, is a single instance of a car with only REFRIGERATOR and a red/white/blue UP medallion... if you have a color photo illustrating this, I would love to see it.]

While PE 1614 was the focus of this image, the PFE reefer behind it and to the right is adorned with the scheme used on PFE reefers between 1948 and the beginning of 1950. The reefer visible at left carries the scheme introduced in 1950, the included "RAILROAD" in the UP medallion.

What I can state definitively is that the UP medallion used between 1948 and 1950 with the words "UNION PACIFIC" was black and white and NOT red/white/blue.

This image, while cropped, shows three cars with the 1946-1948 scheme (red, white & blue UP medallion on middle car,) 1948-1950 scheme (black & white UP medallion on right car [which also has "VENTILATED," likely a stenciling error by the painting and lettering crew]) and the post-1950 UP medallion, with "RAILROAD," on the car at left.

The timing of this post is because I am currently at work on the pilot model for a parts set to correctly model the PFE's R-40-25 class of cars. Details about that will follow in a separate post covering the models.

Again, apologies for the watermarks in the images, but the pirates get me down so this is my only recourse