Showing posts sorted by date for query southern gondola. Sort by relevance Show all posts
Showing posts sorted by date for query southern gondola. Sort by relevance Show all posts

Thursday, October 16, 2025

Where we are at...

 


I am typing this from an almost horizontal position. I was supposed to be arriving at Naperville today, but my balky back made other plans. So, I type this from home. It's been a couple months or so since I started things back up in earnest, including casting. As the "RPM season" sets in, I thought it a good time to share a little bit about what's coming over the next few months.


Some old Speedwitch stuff turned up: DT&I gondola, MEC ARA box car parts, NYC stock car roof and 50' combination rectangular and diagonal panel roof (some prototype details here.)

Parts sets have proven to be a good way to dip my toes in the casting pool. I mostly learned a few things about what shape of mold works best for me and how I like a few varieties of silicone. I am adding a couple wrinkles to the existing offerings. First, for the ATSF Bx-34 parts I have added the 1959-1970s scheme, illustrated in the photo at the top of the page. In addition, I have added Shadow Keystone decals covering 1950s+ schemes for the PRR X32A parts. 

This and the following three photos are of the R-40-25 parts




On the parts front, there are also a couple other offerings nearing release. The first is the PFE R-40-25. This set is intended for an undecorated Intermountain R-40-23 kit or any Amarillo/Intermountain PFE R-40-25 that is NOT the delivery scheme as the UP medallions on those cars are incorrect (I will share info on that when these parts are released.) The sets include correct resin ends and etched parts to correct/upgrade the underframe, side sill details, ladders, hatch cover supports, steps, etc. [there is a companion set for the R-40-26 that is in the works, as well; see undeframe photo below.] The other parts release is for the ITC 1937 AAR box cars with AC&F Carbuilder's ends and also includes resin details, etchings, and decals.

R-40-26 underframe floor casting... board-by-board!

Illinois Terminal AC&F Carbuilder's end for 1937 AAR box car (pre-production before changes)

Photo illustrating the extremely subtle ripples in the side sheathing of the PRR X43A

I am also charging ahead with some full kit offerings. The first is the Milwaukee 50' single sheathed auto cars that I teased awhile back. It will be released November 1st via the Speedwitch site (all decals, etchings, trucks, and other parts are already in house so they will ship immediately!) Another project is the Pullman-Standard-built Central of Georgia 10'0" inside height Emergency box car (PS if you have National Scale Car's set for the A&WP/WofA/Georgia, those decals will work on this model, as well.) If the CofGa offering proves popular, I will add Birmingham Southern, as well. I also have three PRR cars in the hopper: the G28, X43A and X45. The G28 is a project that I started years back. It will be a showstopper, with full underframe detail... and the underframe was a unique welded design with very interesting crossmembers so it bears full attention! The X43A was a 40', mostly postwar AAR design car, with welded sides. I have created patterns with extremely subtle waviness to the sides that I am extremely pleased with and they were unusual in the PRR universe in that they were delivered with black roofs. The last of these three is the X45, a proprietary PRR design for a 50' welded box car. I again added waviness to the sides and the Pennsy proprietary details, including the underframe, are really cool. 

The last of the full kits, but by no means least, and listed in its own paragraph, is a Western Pacific flat car built by AC&F in 1942 that is a fully 3D printed offering. It is spectacular. More details to follow on this gem...

A final tease... several years back I presented a clinic including details about scratchbuilding board-by-board patterns for single sheathed cars. I have been fruitlessly looking for those patterns for over a year. I thought they were lost in the past year's move. Well, a few weeks back, they were presented to me. Turns out I had sent them to someone along with a bunch of other stuff and they were returned! Here is the end for the car in question. IYKYK 



Thursday, October 3, 2024

Enterprise Gondolas

 

Note the Murphy-type corrugated steel ends. Ralston Steel Car Co. photo, from Columbus Railroads web site (although I cannot find the exact citation at present)

One of the most visually distinctive cars of the Steam and Transition Eras was the GS (General Service) gondola with drop doors and appliances to allow the doors to be locked or deployed to release the cargo. These cars are generally associated with Western roads, although there were small quantities on roads like the Boston & Maine, Maine Central, and New Haven (note that I am not including the more traditional-looking gons of the N&W, C&O, etc., with full length straight side sills and more simple drop doors, usually four in total, as they are quite different in appearance and operation.)



The SP gons used a flat end with two braces. Ralston Steel Car Co. photo, from Columbus Railroads web site (although I cannot find the exact citation at present)

Even more distinctive-looking were the "Enterprise" gondolas of the Union Pacific and Southern Pacific. They incorporated small sloped sections at the bottom of the interior of the sides, that made them look "short" compared to other gons. Besides the small sloped section of the sides, the distinguishing feature, and what made these "Enterprise" gondolas, was the mechanism that allowed the doors to be lowered. It consisted of "links" that when the rod on which they were threaded was turned, they "unfolded" until the doors were lowered and the links, fully extended, held the doors in an open position. In reverse, the links efficiently folded up. It was an ingenious design. The photo of SP 46954, from class G-50-9, illustrates how the links appeared when the doors were in the dropped and open position.

RoadSeries BeginSeries EndQtyBuiltBuilderClass
UP620006299910001920RSCG-50-7
UP630006399910001920PC&MG-50-7
AE40004025261923GATCG-50-9
PE570058992001923GATCG-50-9
PE590059991001923GATCG-50-9
PE600060991001923RSCG-50-9
SP46155466044501923GATCG-50-9
SP46605470794751923RSCG-50-9
PE20000205996001924GATCG-50-9
SP914009239910001925TCI&RRG-50-10
SP92400928995001926PSCG-50-11
SP929009389910001927SSCG-50-12
GATC - General American Transportation
PC&M - Pullman Car & Manufacturing
PSC - Pressed Steel Car
RSC - Ralston Steel Car
SSC - Standard Steel Car
TCI&RR - Tennessee Coal, Iron and Railroad
UP diagram states series 63000-63999 built 1920, but photo evidence indicates majority of cars built in 1921

The cars were rated at a respectable cubic capacity of 1776 cu. ft. with an inside length of 41 ft. 6 in. (for comparison, the SP's steel and composite GS gons built in the 40s had listed cubic capacities between 1776 and 1948 cu. ft.) The accompanying table lists the information for both roads' cars. They represented significant groups of cars for both, especially the SP, where they were a signature car from the 20s into the 50s. The SP/PE cars were shuffled around a bit and were then renumbered entirely in 1956 as part of the systemwide renumbering. The accompanying table traces those changes.

ReportingSeries StartSeries EndBuiltQty.Class1956 SeriesNotes
SP14112144421924331G-50-9360002-3603041
SP44160443591923-4200G-50-9360305-3604572
SP4436144428192369G-50-9360458-3605113
SP46155466041923450G-50-9360512-360789
SP46605470791923475G-50-9360790-361054
SP9130191325192325G-50-9361055-3610684
T&NO42250424491923-4200G-50-9---5
SP914009239919251000G-50-10361098-361993
SP92400928991926500G-50-11361994-362376
SP929009389919271000G-50-12362377-363024
1 - transferred from PE 20000-series in 1951
2 - transferred from PE 5900- [100 cars], 6000- [16] and 20000-series [84]
3 - transferred from PE 6000-series
4 - ex-Arizona Eastern; transferred to SP in 1924
5 - transferred from PE 20000-series in 1929 [100 cars]; Dec 1940 from PE 6000-series [15] and 20000-series [85]

The three cars shown in this photo are all UP G-50-7s and clearly illustrate the Murphy-style corrugated ends. "Council Bluffs Iowa Railroad Strike,"Feb 6, 1951, Robert Paskach photo, Robert Paskach Collection, The Durham Museum



Many of the SP cars from classes -9 and -10 had the lower side sections and slope sheets replaced by welding new steel in place, as illustrated in this photo of G-50-10, with its palindromic number 361163 (some cars also included a relatively small number of rivets, as well.) This was because the side and slope sheet sections were a single piece. On the G-50-11 and G-50-12 classes the side sheets and slope sheets were separate sections, with the top of the slope sections overlapping the bottom of the side sheets, creating an "edge" inside the carbody where the two met, Bob's Photo

SP 92622, a G-50-11, shows the separate side sheets, riveted along the bottom edge of the side sheet sections. Given that the side and slope sheets were distinct parts, repairs presumably involved only the component requiring maintenance as opposed to the entire side and slope sheet section, unless both required work, of course. Indio, California, Mar 11, 1956, Col. Chet McCoid photo, Bob's Photo


Tuesday, August 23, 2022

Texas & New Orleans Emergency Design Gondolas

 

Merrilees Collection, National Archives of Canada, Neg. no. PA204100

From 1944 to 1951, the Texas & New Orleans added 3,100 gondolas that were based upon the Emergency de- sign 50-ton gondola, substituting wood in place of steel to conserve precious plate steel during the war. However, the T&NO continued to purchase gons that were of composite design even after the restrictions on plate steel were lifted. The cars were assigned to four classes. The data is presented in the accompanying table. 

In 1959, the T&NO began to replace the wood sheathing with plate steel. About half of the cars were converted. When so modified, the class number was amended to include an ‘A’ after the original class number, e.g. G-50-19 became G-50-19-A.

For more information, consult Southern Pacific Freight Cars, Volume 1: Gondolas and Stock Cars, by Anthony W. Thompson, Signature Press, 2002.

Bob's Photo

Jim Gerstley

Why am I presenting this information, beyond its prototype importance? As an SP modeler, I am a T&NO modeler to a certain degree, as well. This is a ubiquitous gon, T&NO or not and Funaro & Camerlengo has produced a nice resin kit for the Emergency gon. Therefore, it's a good fit for me. That said, I intend to modify the kit to accept Detail Associates ends, which are an appropriate end for many of the prototypes, plus use the Scullin L-V trucks from Plate C that were used on T&NO nos. 46300-46549 (250 cars, G-50-21) and 48000-48499 (500 cars, G-50-24) and the National Scale Car decals. The next post will begin chronicling the build. Stay tuned