One Hundred Ghosts

 

At the recent RPM East Meet, in addition to the usual clinics, vendors, and model display room, I was also able to socialize with some of the usual suspects at the hotel. One of those having traveled from far(ther) afield was Blaine Hadfield of Arrowhead Models, from Wyoming. He brought along a copy of his new book, One Hundred Ghosts, which he had just received from the printer. Both Hunter Hughson and I ordered copies right then and there.

This is one of those books that combines a few of my interests and passions. My interest in things railroad is obvious given this blog, but I am also very passionate about photography as an art medium, especially landscapes, and what can loosely be described as industrial archaeology. This work has all of those in spades. [it is similar, but to me, surpasses Down By the Feed Mill, coming from that same place of affection]

The photography is exceptional, evoking not only the feeling and moods of the grain elevators and their environs, but the actual sense of them as beings. They represented the lifeblood of their pieces of the rural network. Blaine has magnificently captured the emotions wrapped up in these sentinels of the landscape.

I have barely begun to delve into this book. I look forward to reading it in stolen snippets of 10 or 15 minutes to imbibe each elevator and location. Blaine has provided a wealth of background detail, as well, to provide context to the structures and his efforts. Bravo on a job well done!

The images included herein are included for representation. They are simply examples, not any better than any others. I just wanted to illustrate Blaine's fine work. Also, the computer monitor will not do justice to the work in the book. The printing is excellent and the colors and moods of the images are faithfully rendered. 

Sunshine Models Burlington XA-14 Auto Car

 

Virl Davis photo, Scottsbluff, Nebraska, ca. 1958, courtesy of Richard Hendrickson

Many years ago, I purchased one of the Sunshine Models CB&Q XA-14D kits. I have always loved 50' single sheathed auto cars and this prototype just looks massive. However, as much as I like single sheathed cars, I equally dislike HO scale single sheathed models where the patterns were made using Evergreen scribed siding. To my eye, the grooves look all out of proportion compared to the prototype. It's a hangup that is difficult for me to overcome. Fast forward to the past few months. I pulled out the box again and took a look at things. Almost as soon as I purchased the kit, I I had assembled the basic box of sides, ends, underframe, and roof, and felt that I had done a good job of keeping things square. I decided to ignore my misgivings about the board sheathing and plow ahead. Keen observers will note that I didn't build the -D variant; the -D kit included both styles of A ends, "tight" and end door. I opted for tight ends.

East St. Louis, Illinois, Joe Collias photo, 1963

A note about the prototypes is in order. There was a fantastic article in Railway Prototype Cyclopedia 12 about the Burlington's single sheathed auto cars by "Bat" Masterson, Hol Wagner, and Al Hoffman. There were 500 members of class XA-14 in total, all built in 1937 at the road's Havelock shops. There were differences in linings, auto loading equipment, and end doors that resulted in subclasses -A through -D. I would refer those seeking additional information, including about those cars rebuilt with increased inside height to support the war effort, to consult the article.

I made numerous substitutions and changes to the kit along the way. Those are noted in the following bullet points and I will elaborate more on many of these enhancements at a future time.

• I am highly skeptical of the crossties on the model not having any sort of flanges. However, adding flanges to those crossmembers was not something I wanted to engage in
• I added a mix of AB brake parts; I did not add a train line and the pipe from the dirt collector to what would be the train line is unprototypically anchored directly into the floor
• I made all new running boards from strip styrene and also brass for the latitudinal running boards
• the brake step and brackets for the Ajax hand brake housing and pressure retaining valve were all also fashioned from brass
• the end ladder stiles were created from strip styrene
• the top and bottom door guides and tracks were created from strip styrene (unless these parts are perfectly cast in resin, they can be a bear to work with... I found it easier to just make new parts)
• the angle cock brackets are from Yarmouth and the angle cock/air hose parts are from Hi-Tech
• the sill steps are etched parts from Yarmouth
• The uncoupling rod brackets are etched brass parts from my own artwork etched by PPD. The rods are 0.010" wire
• all grabs were bent from 0.010" wire
• the right hand end grab iron bracket was created from brass
• the door handle hardware is from an old resin PRR X31 kit
• the upper side gusset plates are 0.005" styrene
• the trucks are AAR spring plankless from Tahoe and are a "close enough" truck. I am not aware of a correct HO scale truck for an AAR spring plankless design that also has Barber lateral motion devices
• the draft gear (coupler pockets) are a mix... one is a resin part from Pittsburgh Scale Models and the other is from Moloco. The reason being that I had a full set of the PSM resin parts, but managed to lose one along the way (this car was one of many that was reboxed after my disastrous basement flood back in 2011)

The next step is to blast the model to create a surface more amenable to good paint adhesion. After that I still need to add the following:

• rivets
• nut-bolt-washer castings
• the plate on the door for the "Burlington Route" emblem

I will follow up in part two with painting, lettering, and weathering

Flat Car Friday - the same prototype?

Green River, Wyoming, Keith Ardinger photo

I have this Spokane International flat car on my list of projects, likely to appear in kit form (car nos. 5001-5075, built 1951 by American Car & Foundry.) I am hopeful that the Museum of Transportation in St. Louis has drawings and am awaiting their reply to my query. In the meantime, I have been examining my collection of flat car photos for fodder for this blog. I came across the photo shown below and was struck by the similarities to the SI flat shown above (below from St. Louis - San Francisco car nos. 95800-95899, built 1951 by American Car & Foundry.) Dimensionally, the cars are identical and the overall look plus the arrangement of details, notably the type and spacing of the stake pockets, leads me to believe that they were from the same design. I have also inquired about drawings of these Frisco cars to compare, should both be available. I am keeping a keen eye out to see if ACF built other flats like these at around the same time. More about the load on the SI flat coming in the following days, too.

P.S. The SP's F-50-16 class, while similar at first blush and built by ACF, is not the same design as the cars illustrated herein.

Fayetteville, North Carolina, Dec. 23, 1951, Col. Chet McCoid photo, Bob's Photo